Sunday, August 5, 2018

History of the Earth: The Geologic Time Scale



GEOLOGIC TIME SCALE (GTS) is a system of chronological dating that relates geological strata (stratigraphy) to time. It is used by geologists, paleontologists, and other Earth scientists to describe the timing and relationships of events that have occurred during Earth's history.

The largest defined unit of time is the supereon, composed of eons. Eons are divided into eras, which are in turn divided into periods, epochs and ages. The terms eonothem, erathem, system, series, and stage are used to refer to the layers of rock that correspond to these periods of geologic time. Years are expressed as MYA or MA, meaning “million years ago.”

Eons
Eons are the largest intervals of geologic time and are hundreds of millions of years in duration. In the time scale above you can see the Phanerozoic Eon is the most recent eon and began more than 500 million years ago.

Eras
Eons are divided into smaller time intervals known as eras. In the time scale above you can see that the Phanerozoic is divided into three eras: Cenozoic, Mesozoic and Paleozoic. Very significant events in Earth's history are used to determine the boundaries of the eras.

Periods
Eras are subdivided into periods. The events that bound the periods are widespread in their extent but are not as significant as those which bound the eras. In the time scale above you can see that the Paleozoic is subdivided into the Permian, Pennsylvanian, Mississippian, Devonian, Silurian, Ordovician and Cambrian periods.

Epochs
Finer subdivisions of time are possible, and the periods of the Cenozoic are frequently subdivided into epochs. Subdivision of periods into epochs can be done only for the most recent portion of the geologic time scale. This is because older rocks have been buried deeply, intensely deformed and severely modified by long-term earth processes. As a result, the history contained within these rocks cannot be as clearly interpreted.








ALTERNATIVE LEARNING RESOURCES

Watch the following Youtube videos:






You can also memorize the Geologic Periods Song
to help you remember the GTS in a fun way :)



You may download the document version here.



Saturday, August 4, 2018

Paraphrasing, Citation and Referencing





Avoid PLAGIARISM.

Here are the videos you can watch and help you with paraphrasing, citation and referencing. Remember that we are following the APA style (6th Edition). Watch and learn...


PARAPHRASING

CITATION AND REFERENCING (APA Style)




APA Style 6th Edition



Endogenic Processes


LESSON 9
Endogenic Process

Content Standard
The learners demonstrate an understanding of the geologic processes that occur within the Earth. The learners shall be able to make a simple map showing places where erosion and landslides may pose risks in the community.

Learning Competencies
The learners describe the different endogenic forces (S11/12ES-Ic-14 to 24)


Endogenic Forces – Internal forces in detail


Endogenic forces a can be classified as slow movements (diastrophic) and sudden movements. Slow movements cause changes very gradually which might not be visible during a human lifetime.

Slow Movements (Diastrophic forces)

Diastrophic forces refer to forces generated by the movement of the solid material of the earth’s crust. All the processes that move, elevate or build portions of the earth’s crust come under diastrophism. Diastrophism includes:
1.       orogenic processes involving mountain building through severe folding and affecting long and narrow belts of the earth’s crust.
2.       epeirogenic processes involving uplift or warping of large parts of the earth’s crust.
3.       earthquakes involving local relatively minor movements.
4.       plate tectonics involving horizontal movements of crustal plates.
Slow movements can again be classified as vertical movements and horizontal movements.

 

Vertical Movements (Epeirogenic movements):

·         Vertical movements are mainly associated with the formation of continents and plateaus. They are also called as Epeirogenic movements
·         The broad central parts of continents are called cratons and are subject to epeirogeny.
·         They do not bring any changes in the horizontal rock strata.
·         While they cause upliftment of continent, they can also cause subsidence of continent.
·         These movements are originated from the centre of the earth.

 

Horizontal Movements (Orogenic Movements):

·         Horizontal forces acts on the earth’s crust from side to side to cause these movements.
·         They are also known as orogenic movements (mountain building).
·         They bring a lot of disruptions to the horizontal layer of strata leading to a large structural deformation of earth’s crust.
·         They can be classified as forces of compression and forces of tension.

 

Forces of Compression:




·         Forces of compression are the forces which push rock strata against a hard plane from one side or from both sides.
·         The compressional forces lead to the bending of rock layers and thus lead to the formation of Fold Mountains.
·         Most of the great mountain chains of the world like the Himalayas, the Rockies (N. America), the Andes (S. America), the Alps (Europe) etc are formed in this manner.


Forces of Tension: 




·         Forces of tension work horizontally, but in opposite directions.
·         Under the operation of intense tensional forces, the rock stratum gets broken or fractured which results in the formation of cracks and fractures in the crust.
·         The displacement of rock upward or downward from their original position along such a fracture is termed as faulting.
·         The line along which displacement of the fractured rock strata take place is called as the fault line.
·         Faulting results in the formation of well-known relief features such as Rift Valleys and Block Mountains. (E.g. Vindhya and Satpura Mountains)
·         A rift valley is formed by sinking of rock strata lying between two almost parallel faults. (E.g. Valley of Nile, Rift valley of Narmada and Tapti )
·         Rift valleys with steep parallel walls along the fault are called as Graben and the uplifted landmass with steep slopes on both sides are called as Horst.
·         The very steep slope in a continuous line along a fault is termed as Escarpment.


 

Sudden Movements

Examples: Volcanoes and earth quakes.



SUMMARY




Earthquakes: Points you should not miss!


·         The network of seismographic (seismograph is the instrument used to measure earthquakes) stations all over the world record dozens of earthquakes every day. Most of them are not felt by human beings as they are minor quakes only.
·         The occurrence of a severe earthquake is limited to a few regions in the world.
·         The point within the earth’s crust where an earthquake originates is called as the focus or hypocenter or seismic focus.
·         It generally lies within a depth of 6 kms in the earth crust.
·         The point vertically above the focus on the earth’s surface is called as the epicenter.
·         The intensity of earthquake will be highest in the epicenter and decreases as one moves away.
·         All natural earthquakes take place in the lithosphere (i.e, the region which constitutes the earth’s crust and rigid upper part of the mantle).


 

Earthquake waves or Seismic waves

·         The earthquake which originates in the lithosphere propagates different seismic waves or earthquake waves.
·         Earthquake waves are basically of two types – body waves and surface waves.
·          

 

Body waves

·         They are generated due to the release of energy at the focus and moves in all directions traveling through the body of the earth. Hence, the name – body waves.
·         They travel only through the interior of the earth.
·         Body waves are faster than surface waves and hence they are the first to be detected on a seismograph.
·         There are two types of body waves as primary waves and secondary waves.

 

Primary waves (p-waves):

·         Primary waves are the fastest body waves (twice the speed of s-waves) and are the first to reach during an earthquake.
·         They are similar to sound waves, i.e, they are longitudinal waves, in which particle movement is in the same direction of wave propagation.
·         They travel through solid, liquid and gaseous materials.
·         They create density differences in the earth material leading to stretching and squeezing.


 

Secondary waves (s-waves):

·         They arrive at the surface with some time-lag after primary waves.
·         They are slower than primary waves and can pass only through solid materials.
·         This property of s-waves led seismologists to conclude that the earth’s outer core is in a liquid state. (the entire zone beyond 105from the epicenter does not receive S-waves)
·         They are transverse waves in which directions of particle movement and wave propagation are perpendicular to each other.


Surface Waves

·         When the body waves interact with surface rocks, a new set of waves is generated called as surface waves.
·         These waves move along the earth surface.
·         Surface waves are also transverse waves in which particle movement is perpendicular to the wave propagation.
·         Hence, they create crests and troughs in the material through which they pass.
·         Surface waves are considered to be the most damaging waves.
·         Two common surface waves are Love waves and Rayleigh waves.

 

Love waves:

·         This kind of surface waves causes horizontal shifting of the earth during an earthquake.
·         They have much slower than body waves but are faster than Rayleigh.
·         They exist only in the presence of semi-infinite medium overlain by an upper finite thickness.
·         Confined to the surface of the crust, Love waves produce entirely horizontal motion.



Rayleigh waves:

·         These waves follow an elliptical motion.
·         A Rayleigh wave rolls along the ground just like a wave rolls across a lake or an ocean.
·         Because it rolls, it moves the ground up and down and side-to-side in the same direction that the wave is moving.
·         Most of the shaking felt from an earthquake is due to the Rayleigh wave, which can be much larger than the other waves.


 

Shadow regions of waves

·         We already discussed that p-waves pass through all medium while S-waves passes only through solid medium.
·         With the help of these properties of primary waves, seismologists have a fair idea about the interior of the earth.
·         Even though p-waves pass through all mediums, it causes reflection when it enters from one medium to another.
·         The variations in the direction of waves are inferred with the help of their record on seismographs.
·         The area where the seismograph records no waves is called as ‘shadow zone’ of that wave.
·         Accordingly, it is observed that the area beyond 105does not receive S-waves and the area in between 105to 140 does not receive P-waves.





Measuring earthquakes

·         Seismometers are the instruments which are used to measure the motion of the ground, which including those of seismic waves generated by earthquakes, volcanic eruptions, and other seismic sources.
·         A Seismograph is also another term used to mean seismometer though it is more applicable to the older instruments.
·         The recorded graphical output from a seismometer/seismograph is called as a seismogram. (Note: Do not confuse seismograph with seismogram. Seismograph is an instrument while seismogram is the recorded output)
·         There are two main scales used in the seismometers: (1) Mercalli Scale and Richter Scale.

Mercalli Scale:

The scale represents the intensity of earthquake by analyzing the after effects like how many people felt it, how much destruction occurred etc. The range of intensity is from 1-12.

Richter Scale:

The scale represents the magnitude of the earthquake. The magnitude is expressed in absolute numbers from 1-10. Each whole number increase in Richter scale represents a ten times increase in power of an earthquake.

Distribution of Earthquakes

·         There are two well-defined belts where earthquakes frequently occur – The Circum-Pacific Belt and The Mid-World Mountain Belt.




·         About 68% of earthquakes in the world occur in the Circum-Pacific Belt.
·         Mid-World Mountain belt extends from the Alps with their extension into Mediterranean, the Caucasus, and the Himalayan region and continues to Indonesia.
·         21% of earthquakes are occurring in this belt.
·         The remaining 11% occur in the other parts of the world.


Volcanoes: Everything You Need To Know



A volcano is an opening in the earth’s crust through which gases, molten rocks materials (lava), ash, steam etc. are emitted outward in the course of an eruption. Such vents or openings occur in those parts of the earth’s crust where the rock strata are relatively weak. Volcanic activity is an example of endogenic process. Depending upon the explosive nature of the volcano, different land forms can be formed such as a plateau (if the volcano is not explosive) or a mountain (if the volcano is explosive in nature).

 

Review: Magma vs Lava

·         Magma is the term used to denote the molten rocks and related materials seen inside earth. A weaker zone of the mantle called asthenosphere, usually is the source of magma.
·         Once this magma came out to the earth surface through the vent of a volcano, it is called as the Lava. Therefore, Lava is nothing but the magma on earth surface.
·         The process by which solid, liquid and gaseous material escape from the earth’s interior to the surface of the earth is called as Volcanism.

 

Types of Volcanoes

Volcanoes are classified on the basis of nature of eruption and the form developed at the surface.






Shield Volcanoes

·         How to identify: They are not very steep but are far and wider. They extend to great height as well as distance.
·         They are the largest of all volcanoes in the world as the lava flows to a far distance. The Hawaiian volcanoes are the most famous examples.
·         Shield volcanoes have low slopes and consist almost entirely of frozen lavas.
·         If you were to fly over top of a shield volcano, it would resemble a warrior’s shield, hence the name.
·         These volcanoes are mostly made up of basalt (less viscous), a type of lava that is very fluid when erupted. For this reason, these volcanoes are not steep.
·         They are of low explosive in general, but if somehow water gets into the vent they may turn explosive.
·         The upcoming lava moves in the form of a fountain and throws out the cone at the top of the vent and develops into cinder cone

Cinder Cone Volcanoes:

·         Cinders are extrusive igneous rocks. A more modern name for cinder is Scoria.
·         Small volcanoes.
·         These volcanoes consist almost entirely of loose, grainy cinders and almost no lava.
·         They have very steep sides and usually have a small crater on top.

Composite Volcanoes:

·         Shape: Cone shaped with moderately steep sides and sometimes have small craters in their summits.
·         Volcanologists call these “strato-” or composite volcanoes because they consist of layers of solid lava flows mixed with layers of sand- or gravel-like volcanic rock called cinders or volcanic ash.
·         They are characterized by the eruption of a cooler and more viscous lavas than basalt.
·         These volcanoes often result in explosive eruptions.
·         Along with lava, large quantities of pyroclastic materials and ashes find their way to the ground.
·         This material accumulates in the vicinity of the vent openings and leading to the formation of layers, and this makes the mount appears as composite volcanoes.

Caldera:

·         These are the most explosive of the earth’s volcanoes.
·         They are usually so explosive that when they erupt they tend to collapse on themselves rather than building any tall structure. The collapsed depressions are called calderas.
·         Their explosiveness indicates that its magma chamber is large and in close vicinity.
·         A caldera differs from a crater in such a way that a caldera is a huge depression caused by a collapse after a large-scale eruption, whereas a crater is a small, steep side, volcanic depression bored out by an eruptive plume.

Flood Basalt Provinces

·         These volcanoes outpour highly fluid lava that flows for long distances.
·         The Deccan Traps from India, presently covering most of the Maharashtra plateau, are a much larger flood basalt province.

Mid-Ocean Ridge Volcanoes

·         These volcanoes occur in the oceanic areas.
·         There is a system of mid-ocean ridges more than 70,000 km long that stretches through all the ocean basins.
·         The central portion of this ridge experiences frequent eruptions.

Volcanoes can also be classified based on the frequency of eruption, mode of eruption and characteristic of lava.





Volcanic Landforms:

·         The lava that is released during volcanic eruptions on cooling develops into igneous rocks.
·         The cooling may take place either on reaching the surface or from the inside itself.
·         Depending on the location of the cooling of lava, igneous rocks are classified as:

Volcanic Igneous rocks (Extrusive igneous rocks):

Cooling of the rock occurs at the surface of the earth.  E.g. Basalt, Andesite etc.

Plutonic Igneous rocks (Intrusive igneous rocks):

Cooling takes place in the crust and not over the surface. E.g. Granite, Gabbro, Diorite etc. Intrusive igneous rocks are classed into the following types according to their forms.

1.       Batholiths: A large body of magmatic material that cools in the deeper depth in the form of a large dome. These are granitic bodies. They sometimes appear on the earth surface when the denudation processes remove the overlying materials.
2.       Laccoliths: Large dome shaped intrusive bodies with a level base and pipe-like conduit from below. Resembles a composite volcano structure, but beneath the earth. (Eg: Karnataka Plateau)
3.       Lapoliths: They are saucer shaped, concave to the sky.
4.       Phacoliths: Wavy materials which have a definite conduit to source beneath.
5.       Sheets/ sills: They are the near horizontal bodies of intrusive igneous rocks. Thinner ones are called as sheets and while thick horizontal deposits are called sills.
6.       Dykes: When the lava comes out through cracks and fissures, they solidify almost perpendicular to the ground to form wall like structures called dykes. (Eg: Deccan traps in Maharastra region).

 

 

  



Distribution of Volcanoes:

Most of the volcanoes in the world are found in three well defined belts:
1.       The Circum-Pacific Belt (The Pacific Ring of Fire).
2.       The Mid-World Mountain Belt.
3.       The African Rift Valley Belt.

 

Volcanic Activity – Points to note down:

·         Volcanoes are closely related to the regions of intense folding and faulting.
·         They occur along coastal mountain ranges, on islands and in the mid oceans.
·         Interior parts of the continent are generally free from their activity.
·         Most of the active volcanoes are found in the pacific region which is thus called as the Pacific Ring of Fire.






Plate Tectonics Theory

The theory of plate tectonics is what brings together continental drift and seafloor spreading. Plates are made of lithosphere topped with oceanic and/or continental crust. The plates are moved around on Earth's surface by seafloor spreading. Convection in the mantle drives seafloor spreading. Oceanic crust is created at mid-ocean ridges. The crust moves outward from the ridge over time. The crust may eventually sink into the mantle and be destroyed. If a continent sits on a plate with a mid-ocean ridge, the continent will be pushed along.





Plate Boundaries
Two plates meet at a plate boundary. There are three types of plate boundaries since there are three ways that plates can meet. Plates can move away from each other. They can move toward each other. Finally, they can slide past each other. The three types of plate boundaries are divergent, convergent, and transform. They are described in the following three concepts.

Most geological activity takes place at plate boundaries. This activity includes volcanoes, earthquakes, and mountain building. The activity occurs as plates interact. Giant slabs of lithosphere moving around can create a lot of activity! The features seen at a plate boundary are determined by the direction of plate motion and by the type of crust found at the boundary.




·         Divergent boundaries -- where new crust is generated as the plates pull away from each other.
·         Convergent boundaries -- where crust is destroyed as one plate dives under another.
·         Transform boundaries -- where crust is neither produced nor destroyed as the plates slide horizontally past each other.
·         Plate boundary zones -- broad belts in which boundaries are not well defined and the effects of plate interaction are unclear.

What The Theory Explains
The theory of plate tectonics explains most of the features of Earth’s surface. It explains why earthquakes, volcanoes and mountain ranges are where they are. It explains where to find some mineral resources. Plate tectonics is the key that unlocks many of the mysteries of our amazing planet. Plate tectonics theory explains why:

·         Earth's geography has changed over time and continues to change today.
·         some places are prone to earthquakes while others are not.
·         certain regions may have deadly, mild, or no volcanic eruptions.
·         mountain ranges are located where they are.
·         many ore deposits are located where they are.
·         living and fossil species of plants and animals are found where they are.
·         some continental margins have a lot of geological activity, and some have none.
·         Plate tectonic motions affect Earth’s rock cycle, climate, and the evolution of life.

Summary
The theory of plate tectonics brings together continental drift and seafloor spreading.
At a plate boundary, two plates can be moving apart, together or past each other.
Plate tectonics theory explains many things in geology, such as where volcanoes, earthquakes, mountain ranges, ore deposits, and other features are located.



ALTERNATIVE LEARNING RESOURCE

Watch the following Youtube video:




You may download the DOCX version here.